[. . . ] in case of deviating mains voltage , the data stated on the rating plate are applicable. [. . . ] When working with large drill diameters, the auxiliary handle must be fastened in a right angle with the main handle (see illustrations, section , , Twisting the handle"). When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. Volker Siegle Manager Product Development MAINTENANCE The ventilation slots of the machine must be kept clear at all times. [. . . ] NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]